Front Panel - Maytag Commercial MYR20 Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. To remove the front panel, remove the toe
panel (See page 4-30).
2. Remove the T-30 screw from the front lower
left corner of the front panel.
3. Remove the T-30 screw from the front lower
right corner of the front panel.
Left T-30
Screw

FrOnT paneL

Right T-30
Screw
4-32
4. Grasp the bottom corners of the front panel.
Pull forward and down slightly to remove the
front panel from the washer.
5. There are locating pins at the top and
bottom of the side panels that fit into holes
in the front panel.
6. Components accessible after removing the
front panel include the door lock, ornament
panel, and the cover for the heaters.
Door
Lock
Ornament
Panel
Heater
Cover