Toe Panel - Maytag Commercial MYR20 Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. To remove the toe panel, remove two Star
security screws securing the toe panel to
the front of the washer.
Two Star
Screws
2. Pull the top edge of the panel forward and
lift up to remove two pins, on the bottom of
the panel, from the grommets in the base
rail of the washer frame.
Pin On Toe
Panel

TOe paneL

3. The component accessible behind the toe
panel is the drain valve.
Grommet
In Frame
4-30