Keysight Technologies N5247B Service Manual page 436

Replaceable Parts
Replaceable Parts Listings
Reference Part Number
Designator
0515-1038
not shown
0403-0285
N5247-20131
1400-1334
0403-0179
E4403-20033
0460-2725
0515-0669
N5242-00019
N5242-00048
N5242-00049
N5247-00024
N5247-00025
N5247-00017
N5245-00033
0515-1992
6-198
Qty Description
-- Machine screw M3.0 x 20 pan head (To attach mixer bricks to mount block.)
4 Bumpers, adhesive (Installed on test port couplers in 2-port models only.)
1 Brace, 2-port (To connect the attenuator/reference coupler assemblies with the
70 GHz assemblies.)
-- Cable clamp (with adhesive backing)
4 Gap pad (Between each reference coupler and test set front sub panel.)
4 Gap pad (Between reference couplers 1 & 3, also 2 & 4.
2 Coupler vibe mount, 4-port models (Between port 1 & port 2 couplers & test set
front sub panel.)
-- Machine screw, M4.0 x 0.7, pan head (To attach A24 IF MUX to test set deck.)
1 Stabilizer bracket (Between A23 test set motherboard and A24 IF mux board.)
2 Protective guard for front-panel jumpers - side
1 Protective guard for front-panel jumpers - center (4-port models only.)
1 Protective guard for front-panel jumpers - port 1 (4-port models only.)
1 Protective guard for front-panel jumpers - center (Option 224 only.)
1 Cross bracket on test set deck
2 Bracket, A56 and A57 noise bypass switches (Option 029)
4 Machine screw M5.0 x 20 pan head (To attach noise bypass switch bracket to side
of test set deck.)
Keysight N5247B Service Guide