Keysight Technologies N5247B Service Manual page 323

2-port and 4-port pna-x microwave network analyzer

Hide thumbs Also See for N5247B:

Table of Contents

Replaceable Parts

Replaceable Parts Listings

a. Part numbers in italic typeface are for rebuilt exchange assemblies. Refer to

b. All new units built after August 2009, no longer use the N5242-60031 cable that was attached to connector P1001 and

Source 2. As a result of this change, the IF multiplexer boards have had their P1001 connectors removed. If your instrument

contains a N5242-60031 cable, remove it from your instrument.

Keysight N5247B Service Guide

front-panel LED board

"Rebuilt-Exchange Assemblies" on

Troubleshooting