Lubrication - UNIA TWISTER Operating Instructions Manual

Operating instructions and part catalogue, BALE WRAPPING MACHINE, TWISTER
9.2
The diagram presents the wrapping machine lubrication spots. The regular lubrication is nec-
essary to ensure the long and failure-free operating. All components provided with grease
fittings should be lubricated routinely :
Fig. 37 Lubricating points
1. Catch lug
2. Draught bar actuator lugs
3. Draught bar bolt
4. Actuator bolts and taking arm bolt
5. Lugs of both actuators and two loader bolts
6. Table actuator lugs
7. Knife mechanism lugs of both actuators
8. Gear transmissions in two foil feeders
9. The driving chains of the table and the low-speed mechanism
10. Gear transmission transferring the drive onto the rotational arms
11. Rotating arm axis bearings
The table bolts and the knife arms have been set on special-purpose sleeve bearings requiring no

lubrication.

Lubrication
Page 49