Loading Foil - UNIA TWISTER Operating Instructions Manual

Operating instructions and part catalogue, BALE WRAPPING MACHINE, TWISTER
7.3.

Loading foil

ATTENTION!: Before loading foil, check if all surfaces of parts in contact with
the foil (aluminum cylinders, table drums) are undamaged and clean.
Any scratches, dents and burrs should be removed with fine abrasive paper.
Roll of the foil should be loaded on the foil feeder according in order:
1
2
1. Pull the pre-stretching rollers
(1) aside and lock it with the
hook (2) in that position
3. Locate the roll of foil on the
lower spindle and set it in line
with the upper spindle
3
2. Release the knob (3) and move
the upper spindle (4) upwards
3
4. Release the knob (3) nad press
the upper spindle (4) against the
foil and protect with the knob (3)
4
4