Table of Contents
Advertisement
Operating instructions and part catalogue, BALE WRAPPING MACHINE, TWISTER
3. RESIDUAL RISK
3.1.
Residual risk description
Though Unia-Famarol accepts the responsibility for design and construction in order to eliminate
any risk, some of them are unavoidable while operating the machine.
The residual risk results from the incorrect behavior of the machine operator.
The most dangerous is when performing following forbidden actions:
- use of the machine for the purposes other than those described in the operating instructions,
- being between the machine and the tractor while its engine operating and getting close to
rotating parts of working mechanisms,
- operate the machine without drive shield or with a damaged shield,
- operate the machine by individuals under influence of alcohol or other narcotics,
- transport the machine with its drive not disengaged,
- staying on the machine during it being operated and transported,
- cleaning the machine during its operating,
- operate at open shields,
- checking the technical condition of the machine during it is operating.
When presenting the residual risk, the bale wrapping machine is treated as a machine that has
been designed and made in accordance with current state of technology before launch of the
manufacturing process.
3.2.
Residual risk evaluation
When following such recommendations as:
- careful reading of the operating instructions,
- prohibition of putting hands into inaccessible and forbidden places,
- prohibition of staying on the machine during its operation and transportation,
- maintenance and repairs of the machine – by properly trained people only,
- operation of the machine – by people trained and familiar with operating instructions,
- protect machine against reach of children,
The residual risk might be eliminated while machine is used with no danger to people and
environment.
!
ATTENTION
Residual risk exists in case of not following to specified
recommendations and hints.
Advertisement
Table of Contents
