Warning Decals On The Machine - UNIA TWISTER Operating Instructions Manual

Operating instructions and part catalogue, BALE WRAPPING MACHINE, TWISTER

4. WARNING DECALS ON THE MACHINE

All decals placed the machine must be legible. In a case one of it is destroyed,
the duty of the owner (users) is to replace it by a new one .
There are safety decals on the machine, focusing users' attention to certain risks that could not be
avoided by the structural concept nor by safety parts.
Fig. 2 Warning decals on the machine
Decals description:
1. Before attempting to use the machine, read carefully operating instructions (R/0842).
2. Before attempting any operating actions or repairs, switch off the tractor engine, remove the
key from the ignition and proceed in accordance with the operating instructions (R/0846).
3. Pay attention to movable units of machine that may cause injuries. Do not allow children and
outsiders to stay near the machine (R/0953).
4. Rotate direction.
5. Foil thread scheme.
6. Pay attention to the chain transmission. Take care of transmission condition.
Keep the safe distance – rigid components getting of the machine may result in injuries,.
7.
8. Attention, there are some units in the machine that change their position during operation and
adjustment. Pay attention to it. Do not touch it. It may cause accidents.
9. Attention, machine is equipped with the hydraulic system operating under a high pressure,
take note to its tightness. Take special attention when operating it.
10. Lift catching point.
The decals should be kept in cleanness and must be legible.
If destroyed, the new ones should be ordered from the manufacturer.
10