Table of Contents
Advertisement
1. Press the
button on the right side of
the steering wheel to enter the "Menu"
interface.
2. Press the
or
option from the menu.
3. Roll the right roller to adjust the menu.
4. After adjustment, press the right roller to
confirm the option have been selected
from the menu and exit.
Driving Information
When there is no fault/operation prompt
information on the instrument cluster,
roll the right roller to select the "Driving
Information" interface.
Driving information includes: driving range,
energy flowchart, average accumulated
energy consumption, average vehicle
speed, driving time, average energy
consumption for the past 50 km and tyre
pressure.
REMINDER
•
The average energy consumption
for the past 10, 25, or 50km can
be viewed by tapping on
New Energy > Energy > Energy
Consumption Curve on the centre
console touchscreen.
button to select an
/
>
Fault Information
When the vehicle experiences a system
fault or operation, the instrument cluster
displays the fault/operation prompt
information:
•
When a fault prompt appears, it can be
cancelled by pressing the right roller.
•
An operation prompt disappears
automatically after a few seconds.
REMINDER
•
Menus, driving information, faults and
other information displayed on the
instrument cluster vary depending
on vehicle features. Check your own
vehicle for the display.
Adjusting Instrument
Cluster Brightness
To adjust instrument brightness, pull down
the Quick Settings menu or tap on the
/
> Vehicle Settings > Display to
select Vehicle/Instrument Brightness
Adjustment on the centre console
touchscreen.
08
81
Advertisement
Table of Contents
