Replacing Wiper Blades - BYD TANG EV 2021 Owner's Manual

Table of Contents

Advertisement

CAUTION!
Whenever the A/C system is
overhauled, the maintenance station
should be required to ensure the use
of refrigerant recycling equipment.
Check the radiator and A/C condenser
regularly. Remove leaves, insects and
dust accumulated on the surface.
These deposits will hinder the air
flow and reduce the cooling effect.
If the cooling effect of the A/C
system is not optimal, contact a BYD
authorised dealer or service provider.
REMINDER
In cold months, it is recommended
that the A/C is turned on once a week
for at least 10 minutes to circulate the
fluid in the refrigerant unit.
SUSTAINABILITY
Recycle the refrigerant in accordance
with local regulations.

Replacing Wiper Blades

Check the condition of the front and rear
wiper blades at least once every six months
to see if there are cracks, hardening, etc.
If any of these are found, the wiper blades
should be replaced. Failure to do so will
result in streaks or scratches over use.
Replacing Front Wiper Blade
1. Power on vehicle.
> Vehicle
2. Tap on
/
Health>Repair and Maintenance on
the centre console touchscreen to
activate the Front Wiper Check feature.
The front wiper will automatically enter
170
repair position.
3. Lift the wiper arm.
4. Press the wiper blade locking button (1),
hold the wiper blade buckle, and pull
out the wiper blade (2).
5. Follow the same procedure in reverse to
insert the new wiper blade into the wiper
arm and lock it in place.
6. Gently lay the wiper arm onto the front
windscreen.
> Vehicle
7. Tap on
/
Health>Repair and Maintenance on
the centre console touchscreen to
deactivate the Front Wiper Check
feature. the front wiper automatically
run to the initial position.
Replacing Rear Wiper Blade
1. Power on vehicle.
> Vehicle
2. Tap on
/
Health>Repair and Maintenance on
the centre console touchscreen to

Advertisement

Table of Contents
loading

Table of Contents