Table of Contents
Advertisement
Lane Departure Warning
System (LDWS)
LDWS detects front lane markings by using
a multi-functional video controller. When
the vehicle speed is above 60 km/h and the
driver unconsciously drifts out of the lane,
LDWS will alert the driver.
Turning LDWS On
Pull down Quick Settings menu and tap on
> DiPilot > Lane Assistance System
/
(LAS) on the centre console touchscreen
to turn LDWS on. A prompt reading "Lane
assist setting is successful, the function will
be on if the speed exceeds 60km/h" will be
displayed on the instrument cluster.
REMINDER
•
LDWS memorises the on/off status of
this function in the previous driving
cycle by default.
Setting LDWS
Tap on
/
> DiPilot > Lane Assistance
System (LAS) on the centre console
104
touchscreen to set the LDWS warning
modes:
Reminder mode: Voice, Vibration, Both.
LDWS Working Status
Lane markings are displayed on the
instrument cluster when LDWS is turned
on.
Colour
Lane markings are
Grey
unidentified.
Lane markings have been
Green
identified.
The vehicle has deviated
while the driver is not actively
changing lanes. At this time,
Red
the vehicle will emit an alarm
as set, prompting the driver to
quickly correct orientation.
Turning LDWS Off
Pull down Quick Settings menu and tap
on
/
> DiPilot > Lane Assistance
System (LAS) on the centre console
touchscreen to turn it off.
System Limit
LDWS may incorrectly detect or fail to
detect lane markings in complex traffic
road environments, and may not function
or be significantly worsened if:
•
Line of sight is poor due to snow, rain,
fog, etc.;
•
The front windscreen is dirty and foggy
or there is an object in front of the multi-
function video controller;
•
Glare is caused by direct sunlight,
reflections from accumulated water on
the road surface, incoming vehicles on
Descriptions
Advertisement
Table of Contents
