Table of Contents
Advertisement
REMINDER
•
When the vehicle has been inactive
for an extended period of time, the
smart charging function may activate.
•
Power for smart charging comes from
the vehicle's high-voltage battery,
which may reduce its SOC.
Battery Thermal Management While
Charging*
When charging at low temperatures (below
5° C), the battery thermal management
system activates automatically to ensure
optimal temperature and charging
performance.
When charging in AC mode, activate the
battery thermal management system
through the centre console touchscreen to
keep the battery warm. The system enters
battery warming mode after charging
is completed, so keep the charging pile
connected, for it will feed the battery
thermal management system and keep
the battery warm for up to 18 hours. This
function should be activated on a case by
case basis.
REMINDER
•
When the ambient temperature
is above 5℃ , the battery thermal
management system will not activate.
•
If AC charging is interrupted for
any reason before the vehicle is
fully charged, battery thermal
management will not take place.
Compatibility of
Vehicle and Charging
Infrastructure
The following signs in accordance with DIN
EN 17186 provide information on whether
the local power supply is suitable for
the vehicle. The signs are located on the
vehicle's charging socket, components of
the local charging infrastructure (charging
station, socket) and on the charging cable.
The signs refer to standardized charging
systems in accordance with DIN EN 62196.
C
L
11
147
Advertisement
Table of Contents
