Table of Contents
Advertisement
activate the Rear Wiper Check feature.
The rear wiper will automatically enter
repair position.
3. Lift the wiper arm.
4. Lift the wiper arm slightly, press the
wiper blade (1), and remove wiper blade
(2).
5. Follow the same procedure in reverse
to install the new wiper blade, and
gently lay the wiper arm onto the rear
windscreen.
> Vehicle
6. Tap on
/
Health>Repair and Maintenance on
the centre console touchscreen to
deactivate the Rear Wiper Check
feature. the rear wiper automatically run
to the initial position.
CAUTION!
•
After lifting the wiper arm, cover the
windscreen with something soft, such
as a towel, to avoid damage to the
windscreen in case the wiper arm
suddenly falls.
•
Do not bend the wiper blade.
Anti-Corrosion Measures
This vehicle has effective anti-corrosion
protection. However, in order to reduce the
risk of corrosion, the following measures
should be taken:
•
Wash the vehicle frequently. Regular
washing can keep it clean and prevent
corrosion.
» If the vehicle runs on roads with
saline or alkali substances in winter,
or if the user lives by the sea, it is
recommended that the vehicle is
carefully cleaned once a month to
reduce corrosion.
» Avoid connectors and electrical parts
when cleaning the vehicle chassis and
wheel casing with a high-pressure
water.
» After winter, make sure not to leave
cleaning chemicals such as snow
melting agents on the vehicle chassis.
•
Check the body paint and decorative
parts.
» If any fragments or cracks are found
on the paint, contact a BYD authorised
dealer or service provider for repair to
prevent corrosion.
•
Keep the vehicle interior dry.
» Moisture and dust easily accumulate
under the carpet. Frequent checking
under the carpet is necessary to
ensure the area remains dry, clean and
corrosion free.
13
171
Advertisement
Table of Contents
