Ravas iForks Service Manual page 29

S
ERVICE
View Current Calibration
3.1-4
Settings (continued)
8
The following values will show on the display in
sequence:
A
Unit type used for calibration
B
Gravity value
C
Zero calibration value and AD value.
D
Weight calibration value(s) and AD values.
NOTE: If one weight was used for weight
calibration, "Weight 2" and "Weight 3" will show
zero for weight on the display.
A
Unit type – lb or kg
Zero Calibration AD Value
Weight Calibration 1,
AD value
Weight Calibration 3,
Weigh value
9
After the sequence is performed, the display will show
"FC_bE".
10
To exit, press the "On/Off" button two times.
6823346-R3
B
Gravity Value
D
Weight Calibration 2,
Weigh value
Weight Calibration 3,
AD value
C
Zero Calibration Value
Weight Calibration 1,
Weight value
Weight Calibration 2,
AD value
Number of Calibration Points
9
10
FK0257.eps
27