Download
Share
Print this page
Ravas iForks Service Manual
  1. Manuals
  2. Brands
  3. Ravas Manuals
  4. Lifting Systems
  5. iForks
  6. Service manual

Ravas iForks Service Manual

Hide thumbs Also See for iForks:

Advertisement

Quick Links

See also: Service Manual , User Manual
SERVICE MANUAL
iForks
Rev.28.09.09
iForks
1
SERVICE MANUAL –

Advertisement

loading
Need help?

Need help?

Do you have a question about the iForks and is the answer not in the manual?

Questions and answers

Related Manuals for Ravas iForks

Summary of Contents for Ravas iForks

  • Page 1 SERVICE MANUAL iForks Rev.28.09.09 iForks SERVICE MANUAL –...

  • Page 2: Table Of Contents

    Table of contents page 1. Calibration 1.1 Corner calibration 1.2 Zero calibration 1.3 Weight calibration 2. Parameter settings 3. Indicator power supply from fork lift truck battery - connection iForks SERVICE MANUAL –...

  • Page 3: Calibration

    TOTAL KG/LB Start up the indicator. Press the on/off key. Check if the calibration- jumper is installed on the Put an empty pallet on board of the indicator iForks. ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB 10 sec. ID CODE...
  • Page 4 ID CODE TOTAL KG/LB Put load M (100–500kg) on position A of the pallet. ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB Put load M (100–500kg) on position B of the pallet. iForks SERVICE MANUAL –...
  • Page 5 ID CODE TOTAL KG/LB Put load M (100–500kg) on position C of the pallet. ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB Put load M (100–500kg) on position D of the pallet. iForks SERVICE MANUAL –...

  • Page 6: Zero Calibration

    Zero calibration ID CODE TOTAL KG/LB Start up the indicator. Empty forks ! Press the on/off key. ID CODE TOTAL KG/LB 10 sec. iForks SERVICE MANUAL –...

  • Page 7: Weight Calibration

    M3 = 2500 Start up the indicator. Press the on/off key. M = total calibration weight loaded onto the Check if the calibration- iForks (incl. pallet if used) jumper is installed on the board of the indicator ID CODE TOTAL...
  • Page 8 ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB Change if needed ! ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB 3 sec. iForks SERVICE MANUAL –...
  • Page 9 ID CODE TOTAL KG/LB Change the value if needed, by pressing the >0< key shortly. ID CODE TOTAL KG/LB 3 sec. Afterwards, repeat this cycle for load M3 -> move the pointer to e3 iForks SERVICE MANUAL –...
  • Page 10 ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB ID CODE TOTAL KG/LB Change gravitation value if needed (enter the g-value of the current location) Or confirm with enter iForks SERVICE MANUAL –...

  • Page 11: Parameter Settings

    0 = never off; 1-99 min Buzzer function active off/ on (direct); on (2 sec. delay) Digital corner calibration active 0 (enabled); 1 (disabled) Compensation factor digital corner A 1.000 1.000 Do not change value after digital corner calibration iForks SERVICE MANUAL –...

  • Page 12: Indicator Power Supply From Fork Lift Truck Battery - Connection

    Leave the parameter-menu and store all entries by pressing 2 times shortly on the CLR key. 3. Indicator power supply from fork lift truck battery - connection Only possible when indicator is equipped with an integrated voltage converter or voltage stabilizer. Brown Blue Black iForks SERVICE MANUAL –...