Adjustments To Be Done By Dealer - Van Raam Husky User Manual

Adjustments to be done by dealer

The correct tension of the chain
The chain should not be too tight. It should hang loose. Without effort you should
be able to move the chain up and down, half a centimetre approximately.
Adjusting chain tension (Husky, Mini, Midi,
Maxi, Maxi Comfort)
To keep the chain tension correct, a special
tensioning wheel is fitted on to the tricycle, as an
integrated chain tensioner.
1. Slightly loosen the screw. Hold the nut at the
back tight with a socket wrench to stop the
screw from slipping.
2. Shift the tensioning wheel in such a way that
the chain hangs loose, as described above.
3. Tighten the screw again.
Adjusting chain tension (Viktoria, Viktor)
To keep the chain tension correct, the back
wheel axle is adjusted. Follow the instructions
below:
1. Slightly loosen the nuts of the back wheel
axle, so that the back wheel can move
backwards and forwards.
2. Slide the back wheel backwards, so that the
chain is hanging loose, as described earlier.
Also slide the bracket [A].
3. At the same time make sure that the wheel
is straight and positioned in the centre of the
frame, as illustrated. Not to the left or to the
right.
4. Slightly tighten the nuts.
Version 22.03
[A]
1.
3.
3.
2.
1.
35/47