Adjustment Of The Tricycle - Van Raam Husky User Manual

Adjustment of the tricycle

Before using the tricycle, adjust it to the measurements of the cyclist. This is of great
importance, especially the saddle and the handlebars.
If an optimal adjustment of the tricycle, as defined in the instructions, is not possible,
you can contact your dealer for a fitting solution.
The brakes are correctly adjusted and should only be adjusted by the dealer during periodic
maintenance.
Take care that fingers and limbs do not get trapped while adjusting the tricycle.
Saddle height (Husky, Mini, Midi, Maxi, Maxi
Comfort, Victoria, Victor)
When the cyclist is sitting on the tricycle and can
put a foot on the pedal in the lowest position,
the saddle height is correct. Adjust the saddle
height in such a way that the leg is stretched but
relaxed in that position.
To adjust the saddle:
1. Slightly loosen the screw [A] using an
Allen key.
2. Slide the saddle to the correct height.
3. Tighten the screw.
Do not pull out the saddle pin further than the marking. The tube
will not go into the shank deep enough and will risk coming off.
This can lead to serious injuries.
Version 22.03
[A]
MIN INSERT
7/47