Table of Contents
Advertisement
Flashing light system
To use the flashing lights press the switch [A]
to the left or right.
To turn off the indicators, move the switch to
the centre position.
The lights work on a battery. To replace the
batteries, turn the screw on the cap and take the
orange cap [B] away. Then remove the PCB [C]
from the holder. You can now replace the battery
[D].
This is a 3-volt lithium battery, CR123A.
Batteries cause environmental pollution. Follow
the local regulations during disposal.
Version 22.03
[A]
[C]
[D]
[B]
31/47
Advertisement
Table of Contents
