Table of Contents
Advertisement
5. The charging time depends on the level of the
battery. The charging time is approximately 2
hours with a 11,4 Ah/36 V battery and
approximately 4.5 hours with a 24,8 Ah/36 V
battery.
6. Once the battery is fully charged, the green LED will
be solid. Now first remove the charging connector of
the charger from the connector of the battery.
7. Then unplug the charger from the socket.
8. Put the battery back in the holder of the
cycle and close the lock.
If necessary, the battery can also be charged directly on the cycle.
Charger:
LED
Status
indication
Green
Standby / battery full
Red
Charging
Red, blinking
Safety: Polarity inversion; Short; Over temperature; Over power;
Over voltage
It is better for the battery if it is charged regularly, rather than wait until it is
completely drained. Never leave the bike with a drained battery!
Ensure that the battery is always pushed straight into the holder.
Version 22.03
4.
20/47
Advertisement
Table of Contents
