Table of Contents
Advertisement
Centrally Operated Lighting
The bike is equipped with centrally operated lighting, with the lighting automatically
turning on when the electric system is activated. Further instructions can be found in the
chapter 'Before the first use'.
Other functions
The smart display has an automatic dimming function. With an inbuilt light sensor the
lights of the display will automatically creating less distraction for the cyclist in darker or
more shadowy conditions.
Charging the Battery
For the best performance and to prolong the life of
the battery, we recommend that you charge the
battery at home at room temperature.
Only use the charger if the temperature of
the environment is between 0 and 35
degrees centigrade.
To charge the battery:
1. Unlock the battery by turning the key a
quarter.
2. Push down and hold the lock. Then pull the
battery out of the holder with your other
hand.
3. Take the battery pack inside. First plug the
charger into the socket. The green LED will
light up. The charger is now on standby.
4. Then insert the charging connector of the charger
into the charging point of the battery. The red LED
will light up. The charger is now charging.
Please note! If the battery is not connected
properly, the green LED will light up (standby
mode). If the connection is poor, unplug the plug
from the socket and clean the charger's
connector with a dry cloth.
Version 22.03
2.
3.
19/47
1.
Advertisement
Table of Contents
