Van Raam Husky User Manual page 30

Back support
Fit the back support under the saddle with the
hexagon socket [A].
First adjust the right depth, by loosening four
nuts [B], putting the back support in the right
position and then tighten the nuts again.
Then adjust the right height by loosening the
two nuts [C], sliding the support in the correct
position and then tighten the nuts again.
[A]
The back support can be fitted with a belt [D].
Use the fastening device to open and close the
belt.
[C]
[B]
[D]
Version 22.03
30/47