Adjustments By Dealer - Van Raam Chat User Manual

Adjustments by dealer

The correct tension of the chains
Several chains are present on the tricycle. These must have enough room for movement.
Without any real effort, the chain must be able to be moved about half a centimetre up
and down.
In order to keep tension on the chain, the rear wheel axis can be adjusted. Follow the
instructions below:
1. Slightly loosen the nuts on the rear wheel
axis, allowing the rear wheel to move back
and forth.
2. Tighten the screws on the two chain
tensioners, making the rear wheel move
backwards and tightening the chain. Do
this in such a way that the chain has some
room to move, as previously indicated.
3. At the same time, make sure the wheel is
straight and located in the middle of the
frame. Not to the left or right. See figure [A].
4. Lightly tighten the nuts of the rear wheel axis.
5. Make sure the tension on the chain is
adequate and that the wheel is attached
straight to the frame.
6. Now firmly tighten the nuts.
User Manual | Chat 19.06
1.
[A]
2.
2.
29