Adjustments By Dealer - Van Raam Chat User Manual

Adjustments by dealer

Setting the steering
In order to realise optimal steering behaviour and
minimal tyre wear, the steering must be set
correctly.
1. Loosen the left and right nuts of the
steering shaft [A].
Please note! This is a nut with a left
wire and a nut with a right wire.
2. Subsequently turn the steering shaft
to adjust the tracking of the wheels.
The wheels must be set parallel.
3. Tighten the nuts of the steering shaft again.
4. Loosen the two nuts of the steering shaft
[B].
Please note! This is a nut with a left wire and
a nut with a right wire.
5. Make sure the steering stop is in the
middle of the steering plate [C].
6. Subsequently move the steering shaft to
ensure that the wheels face straight ahead
when the steering stop is in the middle of
the steering plate.
7. Tighten the nuts of the steering shaft
again.
Version 24.01
[A]
[B]
[C]
34/43