Installing Cables; Optional) Installing A Dry Contact Signal Cable - Huawei ETP4860-B1A2 User Manual

ETP4860-B1A2 Embedded Power
User Manual
Figure 4-10 Installing a rectifier
----End

4.4 Installing Cables

4.4.1 (Optional) Installing a Dry Contact Signal Cable

Procedure
Step 1 Use a flat-head screwdriver to hold the contact in a dry contact port.
Step 2 Install a signal cable in the dry contact port.
Step 3 Remove the screwdriver and check that the signal cable is securely connected to
the dry contact.
Figure 4-11 Installing a dry contact signal cable
----End
Issue 04 (2021-01-05)
NO TE
Connect the output dry contacts to IO1 and IO2 ports.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
41