Table of Contents
Advertisement
ETP4860-B1A2 Embedded Power
User Manual
Figure 6-9 Setting alarm conditions for dry contact inputs
Clearing Associations Between Alarms and Dry Contacts
You can clear associations between all alarms and each dry contact output.
Figure 6-10 Clearing associations between alarms and dry contacts
Setting the Alarm Enable Option, Alarm Severity, and Associated Relays
●
●
●
Step 1 Access the Alarm Parameters menu.
Path: System Settings > Alarm Parameters
Step 2 Select a device type and set alarm parameters.
Issue 04 (2021-01-05)
You can enable or disable each alarm, set the severity for each alarm, or
associate each alarm with relays that have specific dry contact outputs based
on site requirements.
If an alarm is enabled, the SMU generates the alarm when the alarm
condition is met. If an alarm is disabled, the SMU does not generate the
alarm.
Alarm severities are classified into critical, major, minor, and warning.
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning
61
Hide quick links:
Advertisement
Table of Contents
