Common Maintenance Operations On The Live-Capp (Smu11C) - Huawei ETP4860-B1A2 User Manual

ETP4860-B1A2 Embedded Power
User Manual
Figure 7-13 Exporting fault information
----End
7.2 Common Maintenance Operations on the LIVE-C
APP (SMU11C)
Upgrading the Software
●
●
Step 1 Access the SMU upgrade management menu.
Path: OM Tool > SMU upgrade management
Step 2 Select the upgrade file (for example, SMU11C V500R002C10B218) and import it.
----End
Changing a User Password
For security purposes, change your password periodically.
Path: System Settings > Change Password
Restoring Factory Settings
The SMU restarts after factory settings are restored.
Path: Site Configuration > Power System > Basic Control > Restore Factory
Settings
Resetting the SMU
Resetting the SMU takes several minutes. During the resetting, the SMU cannot
monitor or manage rectifiers, batteries, and other connected devices. Resetting the
SMU has no impact on parameter settings so there is no need to set parameters
again.
Path: Site Configuration > Power System > Basic Control > Reset SMU
Setting the System Control Mode
The value of System Control Mode is Automatic by default. When it is Manual,
you can use the LIVE-C APP to control rectifier startup/shutdown, output voltage,
Issue 04 (2021-01-05)
The SMU restarts after the software is upgraded.
The latest LIVE-C app upgrade package has been acquired from Huawei
technical support.
Copyright © Huawei Technologies Co., Ltd.
7 Maintenance
74