Live-C App (Smu11C); Installing The Live-C App; Logging In To The Live-C App - Huawei ETP4860-B1A2 User Manual

ETP4860-B1A2 Embedded Power
User Manual
Figure 6-11 Setting the alarm enable option, alarm severity, and associated relays
----End

6.3 LIVE-C APP (SMU11C)

6.3.1 Installing the LIVE-C APP

Prerequisites
There is a mobile phone running Android 5.0 or later.
Procedure
Step 1 Obtain the latest LIVE-C APP installation package from Huawei technical support.
Step 2 Install the LIVE-C APP on the mobile phone.
Figure 6-12 LIVE-C APP icon
----End

6.3.2 Logging In to the LIVE-C App

Prerequisites
●
●
●
●
Issue 04 (2021-01-05)
You have obtained the LIVE-C app user name and password.
The mobile phone should be within 10 m away from the power equipment.
The mobile phone app may be occasionally disconnected due to difference in
phone model and Bluetooth signal strength. Please try again 5 minutes later.
Certain mobile phones may fail to connect in automatic Bluetooth pairing
mode due to Android system differences. Please select the manual pairing
mode to connect. Locate the pairing request in the notice column and enter
the pairing PIN 0000 or 000000.
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning
62