Installing A Rectifier - Huawei ETP4860-B1A2 User Manual

ETP4860-B1A2 Embedded Power
User Manual
Figure 4-9 Installing an SMU11C
----End

4.3.3 Installing a Rectifier

Prerequisites
●
●
● If the rectifier is damaged, contact your local Huawei office.
● The rectifier slot presents a risk of electric shock. Do not touch the slot with
● High temperature is generated around the air exhaust vent when the rectifier is
● In an indoor scenario, you are advised to power on the rectifier within seven
● In an outdoor scenario, you are advised to power on the rectifier within 24
Procedure
Step 1 Push the locking latch towards the left.
Step 2 Draw the handle downwards.
Step 3 Gently push the rectifier into its slot along the guide rails.
Step 4 Push the handle upwards.
Step 5 Push the locking latch towards the right to secure the handle.
Issue 04 (2021-01-05)
The rectifier is intact after being unpacked.
The filler panel has been removed from the rectifier slot.
NO TICE
your hands.
running. Do not touch the vent with your hands or cover the vent with cables
or other objects.
days after unpacking. If the rectifier cannot be powered on in time, place it in
an indoor environment that is dry and without corrosive gas.
hours after unpacking. If the rectifier cannot be powered on in time, place it in
an indoor environment that is dry and without corrosive gas.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
40