Samsung MultiXpress X4 Series Service Manual page 541

2) Job pause problem
•
Symptom : Job is paused.
•
Cause :
-
User press the stop key.
-
During job pausing process, job status is wrong.
•
Troubleshooting
1) During job pausing process, keep valid state of pause process.
a) Pausing → Paused
b) If user press cancel, paused → canceling → canceled.
c) If user press continue, paused → resuming → progressing.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Troubleshooting
4-291