Table of Contents
Advertisement
4. Troubleshooting
ii) Turn the machine off and remove the rear cover. Unplug and reconnect the LSU cable on main board.
Check that the LSU motor make a sound after turning the machine on.
iii) If the LSU cable is defective, replace it. Check that the LSU motor make a sound after turning the
machine on.
iv) If the problem persists, replace the LSU(JC97-04010A).
► Error Code
U2–6142
U2–6143
► Error message
LSU Failure #U2-6142: Turn off then on.
LSU Failure #U2-6143: Turn off then on.
► Symptom
Hsync signal of the LSU is abnormal.
► Troubleshooting method
CAUTION
Before unplugging the LSU harness, the machine must be turned off and power cord must be removed.
1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up.
2) Print a demo page to check that the machine operates normally.
3) If the problem persists, check the following :
a) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable. Print a demo page to
check that the machine operates normally.
4-228
Copyright© 1995-2017 SAMSUNG. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
