Samsung MultiXpress X4 Series Service Manual page 464

A3 color copier
Table of Contents

Advertisement

4. Troubleshooting
► Error Code
S2–4410
► Error message
Right door is open. Close it.
► Symptom
Front cover or Side cover is opened.
► Troubleshooting method
1) Close the side cover correctly.
2) Check if the cover open sensor connector is connected properly. Reconnect it.
3) If the sensor is defective, replace it.
(Refer to 3.3.31. Front Cover Open Switch.)
► Error Code
S2–5111 / S2–5112 / S2–5120 / S2–5131 / S2–5132 / S2–5133 / S2–5135 / S2–5136 / S2–5161 / S2–5164 / S2–5210 /
S2–5240
► Error message
Failed to adjust the color registration
► Symptom
ACR execution is failed.
► Troubleshooting method
1) Turn the machine off then on.
2) If the problem persists, check the followings.
Check if the ACR sensor is contaminated or defective. Clean the ACR sensor or replace it.
Remove and reinstall the ITB unit. If the problem persists, replace the ITB unit.
4-214
Copyright© 1995-2017 SAMSUNG. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents