Samsung MultiXpress X4 Series Service Manual page 389

A3 color copier

Table of Contents

► Error Code

► Error message

Paper is low in Tray 3. Load paper.

Paper is empty in Tray 3. Load paper.

Paper in the tray is less than 10% of specification. / The photo sensor is defective.

► Troubleshooting method

1) Remove tray3. Load the paper in tray3.

2) If paper is loaded but error message has not disappeared, check the following.

a) Remove the DCF pick up unit1.

b) Check if the photo sensor in the DCF pick up unit1 is contaminated. If so, clean it.

c) If the photo sensor(0604-001393) is defective, replace it.

d) If the actuator(JC66-03199A) is defective, replace it.

4. Troubleshooting

Troubleshooting