Table of Contents
Advertisement
5. Unplug the ITB connector from the right. Pull the
holder to the front.
6. Remove 2 screws.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
7. Pull out the ITB unit until the green handles are shown
totally. Change your grip and release the ITB unit
perfectly.
8. Before install the new ITB unit, align the CAM
position. (Align 2 arrows)
9. Install the new ITB unit. And then install the ITB
cleaner. (Note : Less than torque 6kgf.cm)
3. Disassembly and Reassembly
3-13
Advertisement
Table of Contents
Troubleshooting
