Table of Contents
Advertisement
4. Troubleshooting
► Error Code
A3–2113 / A3–4114
► Error message
The CTD/ACR sensor is dirty. Please clean it with soft cloth or paper.
► Symptom
CTD/ACR sensor window is contaminated.
► Troubleshooting method
1) Open the side cover.
2) Clean the sensor window [A] with a soft cloth.
3) Close the side cover.
4) Enter SVC mode. Select the "CTD Sensor Cleaning"
(Diagnostics Image Management > Auto Color Tone Adjustment Condition > CTD Sensor Cleaning)
5) When pop up appears, select the "Yes" button.
NOTE
a) CTD sensor calibration will start. Then "CTD sensor failure" error will be solved
b) If you don't execute the CTD sensor cleaning in SVC mode, error message persists.
4-98
Copyright© 1995-2017 SAMSUNG. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
