Scanner Unit(Platen Unit) - Samsung MultiXpress X4 Series Service Manual

3. Disassembly and Reassembly

3.3.29. Scanner Unit(Platen Unit)

1. Remove the ADF(DSDF or RADF) unit.
2. Remove 6 screw-caps and 6 screws. Then release the
scan-rear cover.
3. Remove 5 screw-caps and 5 screws. Then release the
scan-front cover.
3-56
4. Remove 3 screw-caps and 3 screws. Then release the
scan-left cover.
5. Remove 3 screw-caps and 3 screws. Then release the
scan-right cover.
6. Unplug the scan cables.
Copyright© 1995-2017 SAMSUNG. All rights reserved.