Part Replacement Alert; Fdi; Eiul (End Of Image Unit Life); Sfe (Special Feature Enablement) - Samsung MultiXpress X4 Series Service Manual

4.5.6.13. Part Replacement Alert

•
Service Functions > Part Replacement Alert
This function enables / disables the alert message of the consumable's life time.
•
ON : Alert message on (Level : Low, Empty, Exhaust, Worn)
•
OFF : Alert message off

4.5.6.14. FDI

•
Service Functions > FDI
In this function, user and administrator can choose the type of FDI.

4.5.6.15. EIUL (End of Image Unit Life)

•
Service Functions > EIUL
The function is to set the machine hard stop when the drum life is expired.
•
Off : No machine stop @ end of drum life
•
On : Machine stop @ end of drum life

4.5.6.16. SFE (Special Feature Enablement)

•
Service Functions > SFE
Special Feature Enablement (SFE) means to provide the configurable options (On/Off) in service mode for technicians or
dealers to satisfy the requirements from B2B sites easily without changing the firmware installed in a device.
NOTE
The description for some codes like a 003, 020 can not be provided by HQ R&D policy.
SFE menu description
SFE Description
Code
001 In case of printing in directional media (Letterhead/Preprinted/Punched), the device prints as the same output
direction regardless of simplex or duplex.
002 The device always prints output as mono about PC printing.
003 confidential
006 The device supports only user's own email address for scan to email.
007 [PCL6] The device prints as original 1 dot line without 2 dot line compensation.
008 [PCL5] The device ignores paper size command in PRN and prints as paper size in tray.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Troubleshooting
4-63