Samsung MultiXpress X4 Series Service Manual page 441

A3 color copier

Table of Contents

► Error Code

► Error message

Paper jam in exit area.

Check whether the pieces of paper remain in the paper path

Paper jam has occurred around the fuser unit.(Job separator connection is defective. / Actuator-Exit is defective.)

► Troubleshooting method

1) Open the side cover. Remove the jammed paper.

2) If the problem persists, check the following:

a) Open the side cover. Check if the connector is connected properly.

b) Remove the JOB-SEPARATOR. Check if the photo sensor is assembled correctly.

c) Check if ACTUATOR-EXIT is assembled correctly. If the ACTUATOR-EXIT (JC66-02533A) is deformed or

broken, replace it.

d) If the photo sensor(0604-001393) is defective, replace it.

4. Troubleshooting

Troubleshooting