Samsung MultiXpress X4 Series Service Manual page 499

4.7.10. Skewed image
A. Typical faulty images
B. Troubleshooting procedure
Step Cause
1 • Cassette is not installed properly.
Too much paper is loaded in the cassette.
•
The cassette guide is not set properly.
•
2 The surface of pick up/ reverse/ forward roller is
contaminated or worn out.
3 If the skewed image occurs for copy job, check the ADF
installation.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
Action
Reinstall the cassette properly.
Clean or replace the contaminated roller.
(Refer to 3.2.2.7.)
Reinstall the ADF(DSDF or RADF) unit.
Adjust ADF skew.
(Refer to 4.8.)
4. Troubleshooting
4-249