Advertisement
CHAPTER 1 CONTROLLER
CHAPTER 1 CONTROLLER
Installation
Installation
(1) Align the four
(1)
Align the four mounting holes
Press at the card edges.
Press at the card edges.
Make sure that the spacer lock works completely and the card is secure.
Make sure that the spacer lock works
(2) Ver
(2)
Verify that
ify that the fl
raising the connector lock.
raising the connector lock.
(3) Inser
(3)
Insert the fla
t the flat cable i
connector lock.
connector lock.
Do not forcibly bend the flat cable. Insert its
Do not forcibly bend the
Verify that the cable is inserted squarely into the connector.
Verify that the cable is
(4)
(4) Install the
Install the cover w
Do not force the flat cable into the inverter cover.
Do not force the flat cable
Do not forcibly bend the
Do not forcibly bend the flat cable. Make sure that the
Verify that the cover is completely locked.
Verify that the cover is completely locked.
(5)
(5) Conne
Connect the m
Forcibly pressing of the connector may cause
Forcibly pressing of the connector may cause damage to the DSP card.
required (for the card with
required (for the card with vertical type connector).
mounting holes of the new
of the new DSP card with
completely and the card is secure.
the flat cabl
at cable conn
e connecto
ector is unlo
t cable into th
nto the conne
e connector
ctor. Press d
flat cable. Insert its conductive surface in the direction shown in the illustration.
inserted squarely into the connector.
cover while pushing
hile pushing the flat
the flat cable tow
into the inverter cover.
flat cable. Make sure that the cable will not be
ct the main harn
ain harness con
ess connect
nector to th
or to the inver
vertical type connector).
DSP card with the plastic spacer
the plastic spacer positions and press
CAUTION
CAUTION
r is unlocked by
cked by
. Press down th
own the e
CAUTION
CAUTION
conductive surface in the direction shown in the illustration.
cable toward the
ard the card side
card side slightly.
slightly.
CAUTION
CAUTION
cable will not be pinched underneath the cover.
pinched underneath the cover.
e inverter.
ter.
CAUTION
CAUTION
damage to the DSP card. Hold the connector housing and press
Hold the connector housing and press the connector, if
positions and press it into place.
it into place.
1-55
1-55
500953
500953
the connector, if
Advertisement
