Advertisement
1-24
1-24
#5 Auxiliary 1 Speed
#5 Auxiliary 1 Speed
This setting
This
setting affects
affects pump
when you operate the attachment 1 lever or attachment 1
when you operate the attachment 1 lever or attachment 1
switch.
switch.
Attachment 1 speed will become faster if the value setting is
Attachment 1 speed will become faster if the value setting is
increased. The setting range is 1 to 10.
increased. The setting range is 1 to 10.
Pump motor
Pump motor
output [%]
output [%]
100
100
0
0
#7 Top Travel Speed Limit
#7 Top Travel Speed Limit
This setting affects ma
This setting
affects maximum tr
affects top speed, and does not
affects top speed, and does not affect gradability or acceleration.
The setting ra
The setting range is for 3-Whee
nge is for 3-Wheel model is 5 t
#8 Acceleration Rate
#8 Acceleration Rate
This setting affect
This setting affects response time
Acceleration of trucks become
Acceleration of trucks becomes faster if the value setting is increased.
pump speed
speed and
and FC
FC solenoid
solenoid current
F
F
C
C
SUO #5 and #6
SUO #5 and #6
10
10
6
6
2
2
1
1
100
100
Lever angle [%]
Lever angle [%]
Pump
Pump moto
motor output characteristics (atta
r output characteristics
ximum traveling spe
aveling speed witho
ed without load.
affect gradability or acceleration.
l model is 5 to 16 [km/h] and
o 16 [km/h] and for 4-Wheel mo
s response time to calculate re
to calculate required torq
s faster if the value setting is increased. The setting range is 1 to 10.
#6 Auxiliary 2 Speed
#6 Auxiliary 2 Speed
current
This setting affects
This
setting affects pump speed
when you operate the attachment 2 lever or attachment 2
when you operate the attachment 2 lever or attachment 2
switch.
switch.
Characteristic is almost the same as auxiliary 1.
Characteristic is almost the same as auxiliary 1.
Attachment 2 speed will become faster if the value setting is
Attachment 2 speed will become faster if the value setting is
increased. The setting range is 1 to 10.
increased. The setting range is 1 to 10.
Pump motor
Pump motor
output [%]
output [%]
100
100
0
0
(attachment 1 and 2
chment 1 and 2
ut load. Traveling spe
Traveling speed with
ed with load will
for 4-Wheel model is 5 to 17 [
del is 5 to 17 [km/h].
quired torque from acc
ue from accelerator pedal
elerator pedal position.
The setting range is 1 to 10.
CHAPTER 1 CONTROLLER
CHAPTER 1 CONTROLLER
pump speed and
and FCC solenoid
FCC solenoid current
M
M
C
C
SUO #5 and #6
SUO #5 and #6
10
10
2
2
1
1
SW Close
SW Close
Lever operation
Lever operation
operation)
operation)
load will be less
be less than this
than this setting.
setting. This setting
km/h].
position.
current
500938
500938
This setting
Advertisement
