Advertisement
1-28
1-28
#21 Regen Adjustment for Brake Regen
#21 Regen Adjustment for Brake Regen
This works when
This works when the brakes are
When the setting value is higher than "#23" ,
When the setting value is
When the setting value is lower than "#23", the regenerative rate will be the same as the "#23."
When the setting value is lower than "#23", the regenerative rate will be the same as the "#23."
#22 Regen Adjustment for Lever Regen
#22 Regen Adjustment for Lever Regen
This setting de
This setting defines the "Lever
fines the "Lever regen" characte
When the direction lever is shifted into the position opposite to the truck's traveling direction, the "Lever regen" function is
When the direction lever is shifted into the position opposite to the truck's traveling direction, the "Lever regen" function is
activated. The "Lever regen" characteristic is shown in this diagram. The
activated. The "Lever regen" characteristic is shown in this diagram. The setting range is 1 to
#23 Regen Adjustment for Auto Regen
#23 Regen Adjustment for Auto Regen
This setting
This
setting defines
defines amount
regen" is activated. This setting defines the amount of
regen" is activated. This setting defines the amount of
deceleration when "Auto regen" is activated. (Setting "10")
deceleration when "Auto regen" is activated. (Setting "10")
The setting ran
The setting range is 1 to 10.
ge is 1 to 10.
Note: With "1" setting, regeneration will not work except
Note: With
"1" setting, regeneration will not work except
when going downhill.
when going downhill.
the brakes are applied.
applied.
higher than "#23" , regenera
regenerative power will increase by stepping on
regen" characteristic.
ristic.
(%)
(%)
100
100
Amount of lever
Amount of lever
regeneration
regeneration
amount of of deceleration
deceleration when
tive power will increase by stepping on the brake.
setting range is 1 to 10.
100
100
Level of throttle pedal [%]
Level of throttle pedal [%]
[%]
[%]
100
100
when "Auto
"Auto
Truck
Truck
speed [m/s]
speed [m/s]
10
10
0
0
Note: *When the setting is "1",
Note: *When the setting is "1", the regener
not be generated, thus the time
not be generated
spontaneous.
spontaneous.
CHAPTER 1 CONTROLLER
CHAPTER 1 CONTROLLER
the brake.
10.
10
10
Value of #22
Value of #22
1
1
Amount of auto regeneration
Amount of auto regeneration
Deceleration regen
Deceleration regen
Value of #23
Value of #23
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
Deceleration regen
Deceleration regen
#23
#23
2
2
9
9
Time [s]
Time [s]
the regenerative braking is
ative braking is
, thus the time for truck to stop is
for truck to stop is
500940
500940
500941
500941
500942
500942
Advertisement
