Advertisement
3-20
3-20
15. . In Insp
15
spec ecti ting EP
15.1 .1 In Insp
15
spec ecti ting
Inspection for damage
Inspection for damage
Check the armature for damage, especially for burning.
Check the armature for damage, especially for burning.
If it is damaged, replace it.
If it is damaged, replace it.
If the surface of Commutator is damaged, repair or replace it.
If the surface of Commutator is damaged, repair or
Inspection of spline
Inspection of spline
Check for wear of spline.
Check for wear of spline.
If it is extremely worn, replace it.
If it is
extremely worn, replace it.
Inspection of ball bearing
Inspection of ball bearing
Check fitting part of the bearing in
Check fitting part of the bearing in the "cover(C), end" and the cover(D).
If loose, replace them.
If loose, replace them.
Inspection of commutator
Inspection of commutator
Check the armature for damage especially by high
Check the armature for damage especially by high
temperature.
temperature.
If it is damaged, replace it.
If it is damaged, replace it.
If the surface of Commutator is damaged, repair or replace
If the surface of Commutator is damaged, repair or replace
it. it.
ng EPS Mo
S Motor
tor
ng Ar
Arma
matu ture re
the "cover(C), end" and the cover(D).
replace it.
1 1 . . G G o o o o d d
1
1
CHAPTER 3 MOTOR
CHAPTER 3 MOTOR
502734
502734
2 2 . . N N o o t t g g o o o o d d
Advertisement
