Wireless Flash: Godox X - Godox V1 C Instruction Manual

•
•
•
•
•
•
•
Maximum Stroboscopic Flashes
Flash
1
Output/Hz
1/4 8
1/8 14
1/16 30
1/32 60
1/64 90
1/128 100 100 100 100 100
1/256 100 100 100 100 100
Wireless Flash: Godox X system
•
When Godox X transmitter is utilized you are able to use all three flash modes: TTL,
•
M and Multi. High-speed sync triggering is also possible.
• Every settings made on the Godox X control panel is instantly sent to Slave device.
You can also
larger groups.
It is required to use a proper Godox X controller to ensure full compatibility with a
•
given camera model.
To avoid overheating and deteriorating the flash head, do not use
stroboscopic flash more than 10 times in succession. After 10 times,
allow the camera flash to rest for at least 15 minutes.
If you try to use the stroboscopic flash more than 10 times in
succession, the firing might stop automatically to protect the flash
head. If this happens, allow at least 15 minutes' rest for the flash.
Stroboscopic flash is most effective with a highly reflective subject
against a dark background.
Using a tripod and a remote control is recommended.
A flash output of 1/1 and 1/2 cannot be set for stroboscopic flash.
Stroboscopic flash can be used with"BULB".
If the number of flashes is displayed as "--", the firing will continue until
the shutter closes or the battery is exhausted. The number of flashes
will be limited as shown by the following table.
2 3 4
6 4 3
14 12 10
30 30 20 20
60 60 50 50
90 90 80 80
To fully explore full potential of Wireless Flash Triggering use one of the
major camera modes such as: P/A/S/M (P/Tv/Av/M). Wireless triggering
will not be available when program modes are used.
divide
all Slave flashes in to groups and control them individually or in
5 6-7 8-9 10
3 2 2
8 6 5
20 10
40 30 20
70 60 50
90 80 70
90 80 70
11 12-14 15-19 20-50
2 2 2
4 4 4
8 8 8
20 20
50 40
70 60
70 60
60-
100
2 2 2
4 4 4
8 8 8
18 16 12
35 30 20
50 40 40
50 40 40
22