Wireless Id; Scan The Spare Channel - Godox V1 C Instruction Manual

Wireless ID

Change the wireless channels and wireless ID to avoid interference for it can only be triggered
after the wireless IDs and channels of the master unit and the slave unit are set to the same.
Press the <MENU> button to enter C.Fn ID. Press the Set Button to choose OFF channel
expansion shutdown, and choose any figure from 01 to 99.

Scan the Spare Channel

1. Press the <MENU> button.
Choose
2.
<SET/OK>.
3. Set channel by moving control dial and press
<SET/OK> to confirm.
To avoid the interference of using the same channel by
others, this function can be used: enter the C.Fn settings and
find the SCAN option. When setting it to START, it will scan
from 1% to 100%. And the 8 spare channels will be displayed
after the scan is completed.
C.Fn-CH settings and press
26