Wireless Id Settings; Scan The Spare Channel; Ettl: Fully Automatic Wireless Flash Shooting - Godox V860III-C User Manual

Wireless ID Settings

Change the wireless channels and wireless ID to avoid interference for it can only be
triggered after the wireless IDs and channels of the Transmitter unit and the Receiver
unit are set to the same. Press the <MENU> button to enter C.Fn ID. Press the Set Button
to choose OFF channel expansion shutdown, and choose any figure from 01 to 99.

Scan the Spare Channel

To avoid the interference of using the same channel by others, this function can be
used: enter the C.Fn settings and find the SCAN option. When setting it to START, it will
scan from 1% to 100%. And 8 spare channels will be displayed after the scan is
completed.

ETTL: Fully Automatic Wireless Flash Shooting

Using Automatic Wireless Flash with a Single Receiver Unit
Transmitter Unit Setting
Attach a V860IIIC camera flash on the camera and set it as the Transmitter unit.
•
X1T-C can also be used as Transmitter unit. X1T-C can control V860IIIC's ZOOM
•
value when the ZOOM is adjusted to auto (A) mode.
Receiver Unit Setting
Set the other camera flash as the wireless Receiver Unit.
•
25