M: Manual Wireless Flash Shooting - Godox V1 C Instruction Manual

TTL Wireless Flash with a
•
•
•
•
Using Fully Automatic Wireless Flash
The FEC and other settings that set on the master unit will also be appeared on the slave unit
automatically. The slave unit does not need any operation. Use the following settings to make
wireless flashes according to the same methods with normal flash shooting.
Flash Exposure Compensation
•
Flash Exposure Lock
•
Multiple Master Untis
Use two or more master units. By preparing several cameras that with master units flash
attached, cameras can be changed in shooting while keeping the same lighting source (slave
unit).

M: Manual Wireless Flash Shooting

This describes wireless (multiple shooting) using manual flash. You can shoot with a different
flash output setting for each slave unit (firing group). Set all parameters on the master unit.
Multiple
Slave Units
Press the depth-of-field preview button on the camera to fire a
modeling flash.
If the slave unit's auto power off function is workable, press the master
unit's test button to power it on. Please note that test firing is
unavailable during the camera's regular metering time.
The effective time of slave auto power off is changeable. (C.Fn-Sv STBY)
By making some settings, the auto AF-assist transmitter will not blink
after the slave unit's flash ready indicator is lightened. (C.Fn-AF)
• When stronger flash output or more
convenient lighting operation is needed,
increase the number of slave units and set it as
a single slave unit.
To add slave units, use the same steps as
•
setting "automatic wireless flash with a single
slave unit". Any flash group can be set (A/B/C/
D/E).
• When the number of slave units is increased
and the master unit flash firing is ON,
automatic control is implemented to make all
groups of flashes fire the same flash output
and ensure the total flash output up is to
standard exposure.
Manual Flash
•
Stroboscopic Flash
•
28