Installing Battery; Battery Level Indicator; Modeling Light - Godox V1 C Instruction Manual

Installing battery

1. To unload the battery, hold down
the battery remove button and push
the battery downwardly to take it
out.

Battery level indicator

The flash indicates the battery level by means of a battery icon located in the upper right
corner of the LCD screen. The meaning of the indications is described below.
Indicator
75-100%
50-75%
25-50%
>25%
>2% The battery level is going to be used out immediately. And the flash
will alarm for the 1 minute and auto power off in 3 minutes. Note: Please
recharge the battery as soon as possible (within 10 days). Then, the battery
(flashing)
can be used or be placed for long period.

Modeling Light

Press the Modeling Lamp Setting button <
the modeling lamp. Short press the Set Button to turn
on or off the modeling lamp. When turning the
modeling lamp on, turn the select dial to set its
brightness. There are 10 levels(01~10) for choice.
Description
>to set
2. According to the triangle sign on the
battery pack, insert it into the
compartment until a white knob
locks the battery with a click sound.
12