Fujifilm – V1F
•
•
•
M: Manual Mode
The flash output is adjustable from 1/1 full power to 1/256th power in 0.1 stop increments. To
obtain a correct flash exposure, use a hand-held flash meter to determine the required flash
output.
With high-speed sync, the faster the shutter speed, the shorter the
effective flash range.
Multi flash mode cannot be set in high-speed sync mode.
Over-temperature protection may be activated after 15 consecutive
high-speed sync flashes.
Use the
Flash Setting
Function Setting on the camera's shooting
menu to adjust settings of the flash light.
More details please refer to camera's
instruction menu.
When choosing FP on the "SYNC" setting, it
means the
high-speed sync function is turned on.
1. Press <MODE> button so that <M> is
displayed.
2. Turn the Select Dial to choose a desired
flash output amount.
> Flash Light
19