Slave unit in Manual Mode
You can directly operate the slave unit to manually set the manual flash or stroboscopic flash.
Stroboscopic
Multi:
1. Setting the flash mode to <M>.
2. Setting flash output.1/2/3/4<A/B/C/D>
•
3. Taking the picture.
•
1. Setting the slave unit.
2. Setting flash mode to <M>.
•
•
Wireless Flash Shooting
1. Setting <MULTI> stroboscopic flash.
•
•
Press Function Button 3 <GR>. Turn the
Select Dial to set the flash output of the
groups. Press Set Button to confirm.
Each group fires at the set flash ratio.
Press <MODE> button so that <M> is
displayed.
Set the manual flash output.
Press <MODE> button so that <MULTI> is
displayed.
Setting the stroboscopic flash.
29