Attaching to a Camera
Basics of use
Use ON/OFF Power Switch to power the flash unit on or off. Turn off if it will not be
•
used for an extended period of time.
•
Setting as a master flash, it will turn the power off automatically after a certain
period (approx. 90 seconds) of idle use.
•
Pressing the camera shutter halfway or pressing any flash button will wake up the
flash unit.
Setting as a slave flash, it will enter sleep mode after a certain period (adjustable, 60
•
minutes by default) of idle use. Pressing any flash button will wake it up.
•
•
Disabling Auto Power Off function is recommended when the flash is
used off camera. (C.Fn-STBY)
Slave Auto Power Off Timer is set to 60 minutes by default. Another
option "30 minutes" is available. (C.Fn-Sv STBY)
1. Attach the Camera Flash.
Rotate the hotshoe fixing buckle to the left
and insert the camera flash into the camera's
hotshoe.
2. Secure the Camera Flash.
Rotate the hotshoe fixing buckle to the right
until it locks up.
3. Detach the Camera Flash.
Press the button and rotate the hotshoe
fixing buckle to the left until it is loosened.
13